Linear axis ball-screw backlash measurement & CNC compensation
Backlash measured with 0.001 mm dial gauge at 5 screw length points; mean and max backlash calculated; compensation value entered in CNC parameter (Fanuc/Siemens); screw nut preload adjusted if backlash >0.05 mm; repeatability accuracy tested with CMM after adjustment.
Same subcategory first, then similar categories, then others
Related services
View all-
CNC spindle drive repair & speed loop tuning
Faulty stage identified (IGBT/diode/capacitor) with diode tester and oscilloscope; repla...
-
CNC pitch error & backlash compensation via laser tracker
Pitch error measured over full axis travel with Renishaw XL-80 Laser Interferometer; Pit...
-
Stepper driver microstepping & current trim calibration
Phase current measured with Rogowski clamp at 1/8,
1/16,...
-
Industrial screw compressor controller repair & set-point tuning
Proprietary controller (Atlas Copco Elektronikon / Kaeser Sigma) repaired or replaced; o...
How it works
Our 6-step repair process
From request to warranted delivery — transparent, fast, and trackable with your RB code.
-
Step 01
Submit request
Open a repair request online or coordinate intake; your unit is logged with an RB tracking code.
- Online request
- RB tracking code
- Fast intake
-
Step 02
Inspection & diagnosis
Engineers run component-level diagnostics and share a clear condition report.
- Technical report
- Root-cause analysis
- Component-level diagnosis
-
Step 03
Cost approval
You receive a clear cost and turnaround estimate; work continues only after your approval.
- Transparent estimate
- Approve before repair
- Clear schedule
-
Step 04
Expert repair
Component-level repair with OEM-grade or verified parts — only failed parts are replaced.
- OEM-grade parts
- Component-level repair
- Specialist technicians
-
Step 05
Testing & QA
Functional and load testing confirm the repair before release.
- Functional test
- Load test
- QA sign-off
-
Step 06
Delivery with warranty
Packed and returned with work report, repair warranty, and online tracking.
- Repair warranty
- Delivery report
- Online tracking
Ready to get started?
Typical first response: 24–72 hours · No fix, no charge
Comments
No comments yet.